Orvis Fly Fishing Accessories

Orvis Tippet Rings

Tippet rings make attaching tippet or leaders quicker and easier to switch out and change. Small metal rings made of stainless steel. Simply tie one to your butt section and tie your tippet to the ring. No more complicated knots. Black nickel finish for low visibility. 10 per pack, threaded onto a snap swivel for convenience.

Sizes:

• Small (2mm 17lb test)
• Medium (2.5mm 26lb test)
• Large (3.1mm 35lb. test)

Orvis Nippers

Not your ordinary nipper. Made in the USA of machined 6061-T6 aluminum, these nippers incorporate a piano-style hinge that adds mechanical advantage for easily cutting anything from 80 lb to 8X tippet. Replaceable cutter and anvil offer excellent corrosion resistance and edge retention. Ergonomic contour for comfort and enhanced function. Type III military-spec anodized. Stainless steel rotating hook-eye cleaner. Comes with lanyard made from fly line. Made in USA.

Colours: Cobalt, Moss, Pewter and Midnight

Orvis Flow Nippers

Designed by Orvis and powered by Loon Outdoors, the Flow Nipper is a step up from ordinary fly-fishing nippers, that's more refined, of higher quality, and more durable. Superior cutting edge for long life. Machined from top quality stainless steel with machined grooves and finished edges for a better grip. 2"L x ½"W.

• Superior cutting edge for long life
• Machined from top quality stainless steel
• Machined grooves and finished edges for a better grip
• Hook-eye cleaner

Orvis Comfy Grip Nippers

These fly-fishing nippers are covered with Comfy Grip for excellent grip in all weather conditions. Easier grip and ability to apply more pressure. Machined from surgical stainless steel with a durable cutting edge and hook-eye cleaning needle.

• Covered with Comfy Grip for excellent grip in all weather conditions
• Machined from surgical stainless steel
• Durable cutting edge
• Hook-eye cleaning needle

Colours available: Citron or Storm Grey

Orvis Comfy Grip Nipper and Zinger Combo

Complete and ready to use—Comfy Grip Nipper with enhanced grip and machined from surgical stainless steel attached to a durable fly-fishing zinger with 20" reach.

• Comfy Grip Nipper with enhanced grip
• Durable zinger with 20" reach

Orvis Magnetic Net Release

The Magnetic Net Release includes upgraded, ultra-strong magnets to ensure the security of a stored net. Heavy-duty hook-and-loop strap gives the option of securing the net by the hoop rather than the handle. Upgraded, durable bungee and split ring clips for securing to pack or vest.

• Upgraded, ultra-strong magnets to ensure security
• Heavy-duty hook-and-loop strap secures the net by the hoop
• Upgraded durable bungee and split ring clips for securing to pack or vest

Orvis Gear Keeper Net Retractor

Full 42" extension will not inhibit reach. The Gear Keeper Net Retractor works hanging on your back or on a float tube. Designed to survive extended saltwater and chlorine exposure. Spectra/nylon cord. Stainless steel spring and hardware. 60-lb. breaking strength. 12 lb. retraction force. Split-ring detachable connection for net. Fly-fishing retractor tool features snap-clip attachment to vest D-ring. Made in USA.

Orvis Gear Keeper Super Zinger

Maximum strength super zinger with 50-lb. breaking strength Spectra cord with 3' reach. Excellent for heavier gadgets or big forceps. Threaded stud attachment keeps it secure through webbing straps or fabric. Quick connect and disconnect for tools.The Orvis heavy duty retractor is saltwater resistant. Made in USA.

Orvis Carabiner 40" Tape Measure / Zinger Combo

High-quality tape measure featuring two different attachment options—a simple belt clip or a carabineer. The zinger itself also functions as a measuring tape made from a high quality waterproof polyester material. Sturdy clip on the end of the zinger holds your tools. Both US and metric measurements. Black nickel finish. 40" tape length.

Orvis Black Nickel Zinger - Pin On

Sleek new look for our classic zinger retractor. Invented by Orvis years ago, this handsome new Black Nickel Zinger will hold any number of tools for easy and immediate access. Comes in pin on and clip on. Sturdy all-metal construction, with a coated wire cord.

Orvis Zinger - Pin On

Small but strong and durable fly-fishing Zinger with retractable coated steel cable and heavy-duty pin fastener. 20" of cable for maximum reach. Imported.

• Retractable coated steel cable
• Heavy duty pin fastener
• 20" of cable for maximum reach

Orvis Quickdraw Forceps

Quickdraw Forceps are the ultimate hemostat, thoughtfully designed for fly fishing from the tips to the jaws to the handle. Powered by Loon Outdoors, the tight angles are engineered to accommodate all fly sizes, allow for easy hook removal, and can crimp even the heaviest of barbs. Oversized thumb and finger holes accommodate large or gloved hands and the compact cutting edge in the jaw easily clips light or heavy leader. Features a carabiner finger loop, flat geometric jaw for easy hook removal/debarbing. Surgical stainless steel with a stealthy matte black rust-resistant finish. Comfy Grip double-dipped handle provides extra tackiness. Eye-clearing needle and locking handles. 6¼"L.

• Engineered to accommodate all fly sizes
• Can crimp even the heaviest of barbs
• Over-sized thumb and finger holes
• Flat geometric jaw for easy hook removal/debarbing
• Compact cutting edge in the jaw
• Comfy Grip double-dipped handle provides extra tackiness
• Eye-clearing needle and locking handle

Orvis Scissor Forceps

A strong pair of hemostatic forceps with built-in scissors for versatility, powered by Loon Outdoors. Matte black rust-resistant finish on surgical stainless steel. Double-dipped Comfy Grip handles offer a secure and comfortable grip even when wet. Locking handles with half smooth, half serrated jaw for positive grip. Hook-eye cleaner. 5½"L.

• Hemostats with built-in scissors
• Matte black rust-resistant finish on surgical stainless steel
• Comfy Grip handles
• Locking handles with half smooth, half serrated jaw
• Hook-eye cleaner

Orvis Comfy Grip Forceps

Surgical quality stainless steel locking forceps with Comfy Grip handles for grip and comfort. Locking handles with half smooth, half serrated jaw. 5½"L.

• Surgical quality stainless steel
• Comfy Grip handles for grip and comfort
• Locking handles
• Half smooth, half serrated jaw

Colours available: Citron or Storm Grey

Orvis Comfy Grip Kit

The Comfy Grip Kit provides the three most important fly-fishing tools an angler needs, all with Comfy Grip for better and more comfortable grip in all conditions. Includes the Comfy Grip Forceps, Nipper, and Zinger. In storm.

• Three most important tools in one kit
• Comfy Grip for better grip in all conditions
• Includes forceps, nipper, and zinger

Orvis Mitten Clamps

Powered by Loon Outdoors, the Mitten Clamps are opened and closed with the same squeezing motion, making clipping them to a pack or vest extra convenient. Surgical stainless steel with a stealthy matte black rust-resistant finish. Double-dipped Comfy Grip handle provides extra tackiness. Built-in scissors, eye-clearing needle, and locking handles. 6"L.

• Opened and closed with the same squeezing motion
• Double-dipped Comfy Grip handle provides extra tackiness
• Built-in scissors, eye-clearing needle, and locking handles

Orvis Fly-Fishing Pliers

These Orvis fly-fishing pliers are the finest on the market, ergonomically designed and made in the USA to work with the natural shape and angle of your hand. Made of machined aluminum with type III military-spec anodizing. Cutters and jaws made of Crucible CPM S35VN for excellent corrosion resistance and edge retention. Replaceable jaws and cutters. Leather sheath is made in USA by Gokey®. Coil lanyard included. In pewter. Made in USA. 6⅞" long.

Orvis Leader Straightener

Get the kinks out quick with our Leader Straightener. Leather exterior with rubber interior for straightening leaders. Silver D-ring for attaching to zinger, vest, or pack.

• Leather exterior with rubber interior for straightening leader
• Silver D-ring for attaching to zinger, vest, or pack

Orvis Tippet Bar

Holds up to seven Orvis tippet spools with both vertical and horizontal attachment options. Great addition to any pack, vest or sling pack.

Orvis Tippet Tool

The Orvis Tippet Tool spool holder is made to organize and carry your tippet spools. Easy to use, this anodized machined aluminum tool is strong, lightweight and functional. Holds seven spools of tippet and has two methods of attachment: a carabiner clip and rings. Made in USA.

Colours: Tidal Blue or Pine

Orvis Aluminium Floatant Holder

Just drop the floatant bottle in and you're ready to go. No need to remove the cap from bottle, insert into caddy and replace cap as with other holders. Made of light and strong aluminum. Small chain or clip attachment. 5 oz. In black. Floatant sold separately. Made in USA.

Note: Floatant not included

Orvis Hy-Flote Gel

Hy-Flote Gel keeps your flies floating higher longer and it is easy to use and temperature stable. Unlike many floatants it won't harden in the cold or melt in the heat. Made in USA.

Orvis Hy-Flote Power Dust

Hy-Flote Powder not only keeps your flies high and dry, but it has a sparkle attractor mixed in and and creates a realistic air bubble effect. Made in USA.

Orvis Hy-Flote Shake-N-Flote Renew

Shake-and-Flote Renew revives drowned flies with just a simple shake of the bottle. No need to change flies and wait for the fly to dry on a patch. Drop the fly into the desiccant still tied to the leader, close the top, shake vigorously and the fly is instantly dry and you're back in business. 2-part powder contains 1) water-loving crystals that suck water and fish slime off the fly, drying it thoroughly and 2) water-hating powder that dusts fly fibers/hairs/hackles with a floatant that repels water so it stands up on its hackle points. Made in USA.

Orvis Hy-Flote Leader/Tippet/Indicator Paste

Leader/Tippet/Indicator Paste is easy to apply to leaders and tippets, keeps them floating and helps eliminate leaders dragging flies under the surface. Makes mending much easier and more effective. Keeps indicators higher on the surface and easier to spot. Made in USA.

Orvis Heavy Metal Extra Sink Putty

Heavy Metal Extra fishing line weight offers a vastly improved alternative to lead shot. Due to its incredible content of tungsten, its weight is comparable to lead, but completely safe and non-toxic. As it warms up it becomes softer. As it cools down it reverts back to its original hardness. Once it has softened to the consistency of chewing gum mold it around your line to your required shape. Immerse fishing line weight in water for ten seconds for the putty to cure and harden before casting. 25g per tub.

Orvis Non-Toxic Split Shot

Weight-forward oval design improves your cast. Four sizes for stream fishing; four microshot sizes for spring creeks and stillwaters.

Orvis Safe Passage Reel Cases

A unique reel case designed to protect your reel both on and off the rod. Constructed out of our new Safe Passage fabric and neoprene for padding, these cases come in 3 sizes to accommodate nearly every reel size.

Colour: Olive/Grey

Sizes:

• Size S will accommodate most trout sized reels from I-III
• Size M handles the intermediate sizes from III to V
• Size L is built to cover the big game sizes V to VII